Mountaineer 2WD V8-4.6L VIN 8 (2006)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
HOOD LATCH RELEASE HANDLE
Removal and Installation
1. Remove the hood latch.
2. Remove the screw and the hood latch release handle.
3. Remove the pin-type retainer and the LH A-pillar lower trim panel.
4. Remove the hood latch release cable assembly screw.
5. Release the hood latch release cable from the 4 cable locators and remove the cable.
6. To install, reverse the removal procedure.
