Mountaineer 2WD V8-4.6L VIN 8 (2006)
Third Row Seat Cushion (Part 2)
Disassembly and Assembly
1. Remove the third row seat from the vehicle.
2. Remove the third row cushion.
3. Release the cushion trim cover J-clips attached to the bottom of the cushion frame.
4. Remove the cushion foam pad and trim cover from the cushion frame.
5. CAUTION: Use care when separating the seat back trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the backrest foam pad.
Invert the cushion trim cover, release the hook and loop strips and separate the cushion trim cover from the cushion foam pad.
6. To assemble, reverse the disassembly procedure.