mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 7387 > < Interior - Erratic Easy Entry Feature Operation|Page 7383
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair

Hydraulic Control Unit (HCU) 

Material

Removal and Installation 

WARNING:  Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the
brakes inoperative. Failure to follow these instructions may result in personal injury.
 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

1. With the vehicle in NEUTRAL, position it on a hoist. 
2. Remove the battery tray. 

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 7387 > < Interior - Erratic Easy Entry Feature Operation|Page 7383