Mountaineer 2WD V8-4.6L VIN 8 (2006)
Remove the 2 brake caliper bolts and the brake caliper.
^
If leaks or damaged boots are found, install a new brake caliper.
Installation
1. CAUTION: Tighten the bottom locator pin brake caliper bolt before tightening the top guide pin brake caliper bolt.
Position the brake caliper and install the 2 bolts.
^
Tighten to 72 Nm (53 ft. lbs.).
2. Using 2 new copper washers, position the brake hose and install the brake hose flow bolt.
Tighten to 35 Nm (26 ft. lbs.).
3. Bleed the brake caliper.
4. Test the brake system for normal operation.
