Mountaineer 2WD V8-4.6L VIN 8 (2006)
^
To install, tighten to 15 Nm (11 ft. lbs.).
4. Remove the 2 parking brake cable bracket-to-crossmember bolts.
^
To install, tighten to 15 Nm (11 ft. lbs.).
5. Disconnect the intermediate parking brake cable from the RH rear parking brake cable at the parking brake cable equalizer.
6. Disconnect the front of the RH parking brake cable conduit at the frame bracket.
7. Disconnect the RH parking brake cable from the parking brake lever and remove the parking brake cable.
8. To install, reverse the removal procedure.
^
Test the parking brake system for correct operation.
