Mountaineer 2WD V8-4.6L VIN 8 (2006)
Parking Brake Shoe: Service and Repair
Parking Brake Shoes
Special Tool(s)
Removal
NOTE: A parking brake shoe kit contains the linings required for both the LH and RH side.
1. NOTE: Make sure the parking brake control is fully released.
Release the tension on the parking brake cable.
2. Remove the rear brake disc.
3. Remove the parking brake shoe adjusting screw.
4. Remove the parking brake shoe adjusting screw spring.
5. Remove the 2 parking brake shoe hold-down springs and pins.