Mountaineer 2WD V8-4.6L VIN 8 (2006)
Water Pump: Service and Repair
Coolant Pump - 4.6L (3V)
Material
Removal and Installation
1. Drain the cooling system.
2. Remove the cooling fan.
3. Remove the accessory drive belt.
4. Remove the bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Remove the bolts and the coolant pump.
^
To install, tighten to 25 Nm (18 ft. lbs.).