Mountaineer 2WD V8-4.6L VIN 8 (2006)
I2-I3
Normal Operation
The parking aid module communicates with the diagnostic tool through the medium speed controller area network (CAN), circuits VDB06 (GY/OG)
and VDB07 (VT/OG). Check the medium speed CAN circuits between the parking aid module C4014 and the data link connector (DLC) C251. The
total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed CAN circuits,
damage to the DLC C251, damage to the parking aid module C4014, or a problem in an in-line connector.
Possible Causes
-
medium speed CAN data plus circuit VDB06 (GY/OG) open
-
medium speed CAN data minus circuit VDB07 (VT/OG) open
-
parking aid module C4014
-
parking aid module
Test J: The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Tool
PINPOINT TEST J: THE DRIVER SEAT MODULE (DSM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL