Mountaineer 2WD V8-4.6L VIN 8 (2006)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (HO2S)
HEATED OXYGEN SENSOR (HO2S)
Exploded View
Socket, Exhaust Gas Oxygen Sensor
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If the RH heated oxygen sensor (HO2S) is being serviced, remove the bolts and position the heat shield aside.
-
To install, tighten to 20 Nm (15 lb-ft).
3. Disconnect the HO2S electrical connector.