Mountaineer 2WD V8-4.6L VIN 8 (2006)
5. NOTE: Body panel and fuel door removed for clarity.
Depress the 2 tabs on the fresh air vent tube in the fuel filler door pocket and disconnect the fresh air vent tube from the inner fenderwell.
6. Disconnect the fuel filler pipe vapor tube-to-fuel pressure sensor and vapor tube assembly quick connect coupling.
7. Disconnect the rear axle vent hose.
8. Disconnect the dust separator hose.
9. Loosen the fuel tank filler pipe hose clamp and disconnect the hose.
-
To install, tighten to 3 Nm (27 lb-in).
10. Remove the 2 bolts and the fuel tank filler pipe assembly.
-
To install, tighten to 15 Nm (11 lb-ft).
11. To install, reverse the removal procedure.
