Mountaineer 2WD V8-4.6L VIN 8 (2006)
Install the safety canopy module front tether bracket and bolt.
-
Tighten to 8 Nm (71 lb-in).
Vehicles with entertainment system
12. NOTE: Make sure to route the entertainment system wiring as noted during removal.
Attach the 2 entertainment system wiring retainers.
Vehicles with moonroof
13. NOTE: Make sure to route the moonroof drain hose as noted during removal.
Connect the rear moonroof drain tube and attach the 2 rear moonroof drain hose clips.
All vehicles
14. NOTE: Make sure to route the safety canopy module wiring harness as noted during removal.
Connect the safety canopy module electrical connector and attach the connector and wiring pin-type retainers to the C-pillar.
Vehicles with auxiliary climate control
15. Install the auxiliary climate control headliner duct and 2 retainers to the C-pillar.
All vehicles