Mountaineer 2WD V8-4.6L VIN 8 (2006)
Control Arm: Service and Repair
Rear
Upper Arm
Upper Arm
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major
service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
CAUTION: Orientation of the suspension fasteners is important. Make sure the fasteners are installed in the same direction as they were in when
removed.
1. Measure the distance from the center of the hub to the lip of the fender with the vehicle in a level, static ground position (curb height).
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Position a suitable Jack under the wheel knuckle and raise the suspension until the distance between the center of the hub and the lip of the fender