Mountaineer 2WD V8-4.6L VIN 8 (2006)
4. Install the main control valve body check balls.
5. NOTE: Use a new valve body separator plate for main control valve body installation.
Using the special tools, install a new main control valve body separator plate.
^
Tighten to 7 Nm (62 inch lbs.).
Solenoid Body Assembly
Solenoid Body Assembly
Material
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the drain plug and drain the fluid.
3. NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.