Mountaineer 2WD V8-4.6L VIN 8 (2006)
5. Remove the fluid pan gasket.
6. Remove and discard the transmission fluid filter.
7. Pull the release tab and pull down on the bulkhead connector retainer.
8. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the TCM. Electrostatic discharge may occur and may
cause damage to the mechatronic unit.
With the release tab down, pull the outer shell of the bulkhead electrical connector out of the TCM.
9. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the TCM. Electrostatic discharge may occur and may
cause damage to the mechatronic unit.