Mountaineer 2WD V8-4.6L VIN 8 (2006)
Mechatronic Lower Half (part 4)
Mechatronic Lower Half
Check Ball Location
Check Ball Location
Disassembly
CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission control module (TCM). An electrostatic
discharge may occur and may cause damage to the TCM/Mechatronic assembly.
NOTE: Make an identifying mark on each solenoid and the corresponding bore for correct assembly.
NOTE: Solenoids may visually appear the same but their designs/functions are different. Caution must be taken not to assemble the mechatronics
assembly incorrectly. Incorrect solenoid installation will result in poor transmission shift quality.