Mountaineer 4WD V6-245 4.0L VIN X SFI (2000)
Installation
1. Note: Clean and inspect the sealing surfaces.
Apply a bead of silicone rubber in two places.
-
Use Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification WSE-M4G323-A4.
2. Install the valve cover gasket, valve cover and the bolts.
-
Tighten the bolts in the sequence shown.
3. Install the EGR tube and the bracket.
4. Install the oil level indicator tube.
