Mountaineer 4WD V6-4.0L VIN E (1999)
Seat Track: Service and Repair
Front Manual
REMOVAL
WARNING:
^
ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE
AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN
ACCIDENTAL DEPLOYMENT.
^
AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE
GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER
AFTERWARD.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result in
damaged components.
1. Remove the front seat.
NOTE: Be sure to read and follow all air bag warnings.
2. Place the front seat upside-down on a clean workbench.
3. Remove the safety belt buckle slide bar.
1. Remove the nut.
2. Remove the bolt.
3. Remove the safety belt buckle slide bar.
4. Remove the seat track to seat cushion front bolts.
