Mountaineer 4WD V6-4.0L VIN E (1999)
Power Seat Switch: Service and Repair
Sport Bucket
REMOVAL
WARNING:
^
ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE
AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN
ACCIDENTAL DEPLOYMENT.
^
AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE
GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER
AFTERWARD.
1. Remove the front seat.
NOTE: Be sure to read and follow all air bag warnings.
2. Remove the lumbar support knob.
3. Remove the rear side shield screw.
4. Release the side shield clips.
CAUTION: To prevent damage to the side shield, the clips must be depressed in order to release the side shield from the cushion pan.
