Mountaineer 4WD V6-4.0L VIN E (1999)
NOTE: The inboard pad has a wear indicator tab.
Install the stainless slippers and the pads.
1
Install the stainless slippers.
2
Install the pads.
2. Inspect the anti-rattle spring, install a new spring if worn or damaged.
3. NOTE: If installing new pads, the caliper pistons must be compressed using a C-clamp and a wooden block. Lower the brake fluid level in the
master cylinder if required.
Rotate the disc brake caliper downward.
4. Install the caliper bolt.
5. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the wheel and tire assembly.
6. Inspect the brake system operation.
