Mountaineer 4WD V6-4.0L VIN E (1999)
a. Tighten the special tool top two clamp bolts to 10 Nm (89 inch lbs.).
b. Tighten the camshaft bolt.
CAUTION: The right-hand camshaft sprocket bolt is a left-hand threaded bolt.
19. Remove the special tool.
20. Install the RH camshaft tensioner.
Note: When using a new washer the camshaft tensioner must be torqued to 44 Nm (32 lb-ft).
21. Raise the vehicle.
22. Install the RH lower splash shield.
23. Install the RH wheel and tire.
24. Lower the vehicle.
25. Remove the special tools from the RH cylinder head.