Mountaineer 4WD V6-4.0L VIN E (1999)
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.
6. Remove the A/C clutch field coil.
1
Note the location of the A/C clutch field coil electrical connector.
2
Install the Field Coil Remover on the nose opening of the A/C compressor.
3
Install the Puller-Differential Side Bearing.
4
Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and pulley bearing mounting surfaces.
2. Install the A/C clutch field coil.
1
Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.
