Mountaineer 4WD V6-4.0L VIN E (1999)
Audible Warning Device: Pinpoint Tests
Test Notes
CAUTION:
^
Before removing and installing the GEM or its connectors, disconnect the battery. Failure to follow this caution will result in the GEM storing
many erroneous DTCs, and it may exhibit erratic operation after installation.
^
Be careful when probing the fuse junction panel, power distribution box or any connectors. Damage will result to the connector receptacle if the
probe or terminal being used is too large.
^
Electronic modules are sensitive to static discharges. If exposed to these charges, damage may result.
NOTE: If continuous DTCs are recorded and the symptom is not present when performing the pinpoint tests, an intermittent concern may be the cause.
Always check for loose connections and corroded terminals.
Complete the entire pinpoint test related to the symptom before replacing the GEM.
A: Safety Belt Warning Chime Doesn't Operate Correctly
A1
