Mountaineer 4WD V6-4.0L VIN E (1999)
1. To decrease caster, move the front of the front suspension arm bushing joint inboard and move the rear of the front suspension arm bushing
joint outboard.
2. To decrease camber, move the front suspension arm bushing joint inboard equally.
5. Tighten the nuts.
6. NOTE: A pry bar can be used between the front suspension arm bushing joint and the frame pocket to aid in moving the arm.
To increase RF caster and camber, use the following steps.
1. To increase caster, move the front of the front suspension arm bushing joint outboard and move the rear of the front suspension arm bushing
joint inboard.
2. To increase camber, move the front suspension arm bushing joint outboard equally.
7. To decrease the RF caster and camber, use the following steps.
1. To decrease caster, move the front of the front suspension arm bushing joint inboard and move the rear of the front suspension arm bushing
joint outboard.
2. To decrease camber, move the front suspension arm bushing joint inboard equally.
