Mountaineer 4WD V6-4.0L VIN E (1999)
Ignition Cable: Service and Repair
Spark Plug Wire
Removal and Installation
1.
Remove the right front tire.
2.
Remove the right front fenderwell splash shield.
3.
CAUTION: Spark plug wires must be connected correctly. Mark the spark plug wires before removing them.
CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
With a twisting motion use the special tool to pull the spark plug wires from the right side of the engine.
4.
Lower the vehicle.
5.
CAUTION: Spark plug wires must be connected correctly. Mark the spark plug wires before removing them.
CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
With a twisting motion use the special tool to pull the spark plug wires from the left side of the engine.
6.
Squeeze the locking tabs and twist while pulling upward to remove the spark plug wires from the ignition coil.