Mountaineer 4WD V6-4.0L VIN E (1999)
4. Install the side air bag module onto the front seat back frame mounting bracket.
1. Position the side airbag module on to the front seat back frame mounting bracket being sure the side air bag wiring harness is located behind
the seat bracket.
2. Install the side air bag module retaining nut.
3. Install the side air bag module retaining nut.
4. Install the side air bag module retaining nut.
WARNING:
^
INSPECT THE MOUNTING SURFACES OF THE SIDE AIR BAG MODULE AND THE SEAT BACK FRAME MOUNTING
BRACKET FOR ANY FOREIGN OBJECTS BEFORE INSTALLING THE SIDE AIR BAG MODULE. IF ANY FOREIGN
OBJECTS ARE FOUND, REMOVE THEM. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY, IN THE EVENT OF
AN AIR BAG DEPLOYMENT.
^
INSPECT THE SIDE AIR BAG DEPLOYMENT CHUTE AND THE SIDE AIR BAG CAVITY IN THE SEAT BACK PAD FOR
ANY FOREIGN OBJECTS. IF ANY FOREIGN OBJECTS ARE FOUND, REMOVE THEM. FAILURE TO DO SO MAY RESULT
IN PERSONAL INJURY IN THE EVENT OF AN AIR BAG DEPLOYMENT.
^
BEFORE INSTALLING THE SIDE AIR BAG MODULE, CHECK IT FOR DAMAGES AND FOREIGN OBJECTS. IF THE AIR
BAG MODULE IS DAMAGED, REPLACE IT. IF ANY FOREIGN OBJECTS ARE FOUND, REMOVE THEM. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY IN THE EVENT OF AN AIR BAG DEPLOYMENT.
^
IF THE AIR BAG COVER HAS SEPARATED OR THE AIR BAG MATERIAL HAS BEEN EXPOSED, INSTALL A NEW SIDE
AIR BAG MODULE. DO NOT ATTEMPT TO REPAIR THE AIR BAG MODULE. FAILURE TO DO SO MAY RESULT IN
PERSONAL INJURY IN THE EVENT OF AN AIR BAG DEPLOYMENT.
CAUTION:
^
The retaining nuts of the side air bag module must be tightened in the sequence described.
^
Be sure the side air bag wiring harness is not pinched between the side air bag module and mounting bracket.
