Mountaineer 4WD V6-4.0L VIN E (1999)
8. Install the swing rods back into the seat back trim cover sleeves.
9. Reaching between the seat back trim cover and the seat back pad, position the top of the swing rods under the listing wire in the seat back pad.
NOTE: The seat back trim cover has been inverted for clarity.
10. Install new hog rings onto the swing rods (one shown).
11. Reattach the seat back trim cover side J-clips (one side shown).
NOTE:
-
Check the positioning of the air bag deployment chute before closing the trim cover.
-
Check that the lumbar strap is secure to the wire paddle before closing the trim cover.
