Mountaineer 4WD V6-4.0L VIN E (1999)
Ignition Switch Lock Cylinder: Service and Repair
Key Release Button (Manual Transmission Only)
Removal
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1. Insert the ignition key into the ignition switch lock cylinder and turn to RUN position.
2. Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
3. If equipped, remove the tilt wheel handle and shank.
4. Remove the upper and lower steering column shrouds.
1. Remove the screws.