Mountaineer 4WD V6-4.0L VIN E (1999)
Four Wheel Drive Selector Switch: Service and Repair
Removal
1. Remove and reposition the center instrument panel finish panel.
1
Remove the screws.
2
Remove and reposition the instrument panel finish panel.
2. Disconnect the electrical connectors.
1
Disconnect the shift range selector switch electrical connector.
2
Disconnect the cigar lighter electrical connectors.
3. Disconnect the electrical connectors.
1
Disconnect the rear heated back light switch electrical connector.
2
Disconnect the rear wiper switch electrical connector (if so equipped).
