Mountaineer 4WD V6-4.0L VIN E (1999)
7. Reposition the anti-lock sensor wire.
1. Remove the front brake anti-lock sensor wire bracket bolt.
2. Reposition the anti-lock sensor wire.
8. CAUTION: Secure the front axle shaft to prevent it from overextending. Failure to do so can cause damage to the front axle shaft.
Suspend the front axle shaft with wire.
9. Remove the tie rod end castellated nut.
1. Remove the tie rod end cotter pin.
2. Remove the tie rod end castellated nut.
10. Use the Pitman Arm Puller to separate the tie rod end.
-
Separate the tie rod end from the front wheel knuckle.
