Mountaineer 4WD V6-4.0L VIN E (1999)
Steering Gear: Service and Repair
Installation
1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
2. NOTE: Make sure the steering gear input shaft is fumed to the left until the stop is reached.
NOTE: Handle the steering gear with caution to avoid damage to the fluid transfer tubes and to avoid dimples in the tie-rod boots.
Turn the steering gear input shaft to the right until the stop is reached. Note the number of sums.
3. NOTE: Make sure the steering gear control valve housing is fumed toward the front of the vehicle.
Install the steering gear into the RH opening of the crossmember.
4. Move the steering gear as far to the RH side of the vehicle as possible.
