Mountaineer 4WD V6-4.0L VIN E (1999)
Level Control Solenoid Valve: Service and Repair
Rear Gate
Removal
1. Connect New Generation STAR (NGS) Tester to the Data Link Connector (DLC).
2. Select the RIDE CONTROL OUTPUT screen and turn on the following solenoids to vent the entire system of air and to lower the vehicle to its
lowest attainable height:
-
REAR FILL (rear fill solenoid).
-
GATEVALVE(gate solenoid[s]).
-
VENT (vent solenoid).
3. Raise and support the vehicle.
4. Remove the spare tire.
5. Remove the evaporative canister.
6. Remove the solenoid valve from the frame.
7. Compress the quick connect locking ring and pull out the air line.
