Mountaineer 4WD V6-4.0L VIN E (1999)
3. NOTE: Before relieving the torsion bar tension, measure and record the measurement of the torsion bar adjustment bolt. This measurement will
be used as the preset depth for the new torsion bar adjustment bolt during installation.
Make preliminary adjustment references.
-
Measure and record the length where indicated.
4. Relieve the torsion bar tension.
1. Position Torsion Bar Tool and adapters.
2. Tighten the Torsion Bar Tool until the torsion bar adjuster lifts off the adjustment bolt.
5. CAUTION: The torsion bar adjustment bolt is coated with dry adhesive; and must be replaced if it is backed offer removed. Failure to
do so can cause the adjustment bolt to loosen during operation and cause a loss of vehicle alignment.
Remove the torsion bar adjustment bolt and nut.
6. Loosen the Torsion Bar Tool until the tension is removed from the torsion bar.