Mountaineer 4WD V6-4.0L VIN E (1999)
7. Install the three way catalytic converter.
8. Install the shift cable.
1
Install the shift cable.
2
Install the shift cable to the manual control lever.
9. Install the digital Transmission Range (TR)sensor.
10. Lower the vehicle.
11. Connect the battery ground cable.
12. Fill the transmission to the proper fluid level and check for proper transmission operation.
-
Use MERCON V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON V specification..
Special Tools
Removal
1. Disconnect the battery ground cable.
2. Raise and support vehicle.
3. Remove the shift cable.
1
Disconnect the shift cable from the manual control lever.
2
Remove the shift cable from the bracket.
4. Remove the digital Transmission Range (TR) sensor.
5. Remove the main control valve body.
6. Remove the Three Way Catalytic Converter (TWC).