Mountaineer 4WD V6-4.0L VIN E (1999)
1
Install the TS S sensor wire into (16 pin) electrical connector.
2
Install the TSS sensor wire into locator.
11. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16 pin) electrical connector retaining spring.
12. Install the EPC, SSD, and SSB solenoids.
13. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the solenoid clamp screws.