Mountaineer 4WD V6-4.0L VIN E (1999)
22. Remove the special tool, and remove the differential case.
1. Remove the special tool.
2. Remove the differential case.
23. Use a fine flat file to remove any burrs and nicks found on the differential ring gear mounting surface.
24. CAUTION: Do not reuse the original bolts.
Using a suitable press, install the differential ring gear.
1. Position the differential ring gear and the differential case. Start two or three new bolts to align the holes in the ring gear and the
differential case.
2. Using a suitable press, install the differential ring gear.
25. Install the remaining new bolts. Tighten all of the bolts to specification.