Mountaineer 4WD V6-4.0L VIN E (1999)
be urethaned.
NOTE:
^
Apply with deliberate strokes, making sure not to overlap applied area.
^
Wipe off the Glass Prep immediately after application because it flash dries.
7. Cut the urethane applicator tip to specification.
8. Apply a urethane bead to the pinch weld just outside the foam dam.
9. Install the inside rear view mirror.
10. Position the windshield glass.
11. Install the upper windshield weatherstrip.
12. If necessary, remove excess urethane from the outside surface of the windshield glass.
