Mountaineer 4WD V6-4.0L VIN E (1999)
Windshield Washer Pump: Service and Repair
REMOVAL
1. Disconnect the windshield washer hose from the windshield washer pump.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
2. Disconnect the coolant overflow hose from the engine coolant overflow reservoir and plug the outlet of the reservoir.
3. Disconnect the windshield washer reservoir pump electrical connector and low level washer fluid electronic sensor connector, if equipped.
4. Remove the engine air cleaner.
5. Remove the two screws and two nuts and remove the windshield washer reservoir.