Mountaineer 4WD V6-4.0L VIN E (1999)
Wiper Motor Linkage: Service and Repair
REMOVAL
1. Cycle the windshield wiper blades to the vehicle position.
2. Remove the cowl top vent panels.
3. Unsnap the wiper motor clip from the RH mounting arm and pivot shaft.
4. Disconnect the RH windshield wiper mounting arm and pivot shaft from the LH windshield wiper mounting arm and pivot shaft and move both
away from the windshield wiper motor.
5. Remove the RH and LH mounting arm and pivot shafts.
1. Remove the two nuts.
2. Remove the mounting arm and pivot shafts.
