Mountaineer 4WD V8-302 5.0L VIN P SFI (2000)
4. For the A/C condenser core , add 30 ml (1 ounce) of clean PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford
specification WSH-M1C231-B to the A/C condenser core or the suction accumulator/drier inlet tube.
5. Add 60 ml (2 ounces) of clean PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B to the
suction accumulator/drier inlet tube when carrying out each of the following repairs:
-
installation of a new A/C evaporator core orifice.
-
installation of a new A/C compressor pressure relief valve.
-
installation of a new refrigerant line.
-
repair of an O-ring seal leak.
-
repair of a charge port leak.
6. Installation of new components that do not require discharge of refrigerant and resulting oil loss, such as the A/C cycling switch and the A/C
pressure transducer, do not require additional oil.
