Mountaineer AWD V6-4.0L (2008)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter
Removal and Installation
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the RH exhaust manifold.
3. Remove and discard the oil filter.
^
To install, tighten to 13 Nm (10 lb-ft).
Vehicles equipped with an oil cooler
4. NOTE: The oil cooler threaded insert is part of the oil cooler and is not removed.
