Mountaineer AWD V6-4.0L (2008)
Removal
1. Remove the flexplate.
2. Remove the spacer plate.
3. Remove the flexplate-to-crankshaft spacer.
4. NOTE: The crankshaft rear seal may have a metal speedy sleeve. This sleeve must be removed before attempting to remove the seal.
If necessary, remove the speedy sleeve using 2 screwdrivers or small pry bars.
5. CAUTION: Avoid scratching or damaging the crankshaft rear seal running surface during removal of the crankshaft rear seal. Scratches
or other damage to the crankshaft may cause oil leaks.
Using the special tool, remove the crankshaft rear seal.
