Mountaineer AWD V6-4.0L (2008)
Install the one end of the transmission fluid filter into the transmission fluid cooler hose with a clamp.
^
Tighten the transmission fluid cooler hose clamp.
8. Using a suitable length of hose, install the other end of the transmission fluid filter into the tubing ferrule hose assembly with 2 clamps.
^
Tighten the hose clamps.
9. Clean a section of the transmission fluid pan, then install the sticker.
10. Fill the transmission with clean transmission fluid.
^
Verify for correct operation.
^
Check the filter for leaks.
