Mountaineer AWD V6-4.0L VIN E (2002)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid - Vehicles Built Before 03/2002
EXHAUST GAS RECIRCULATION (EGR) VACUUM REGULATOR SOLENOID - VEHICLES BUILT BEFORE 03/2002
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the accelerator splash shield.
3. Remove the exhaust gas recirculation (EGR) vacuum regulator solenoid.
1. Disconnect the electrical connector.
2. Disconnect the vacuum lines.
3. Remove the screws.
4. To install, reverse the removal procedure.