mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Driver/Vehicle Information Display|Testing and Inspection > < Information and Message Center|Page 8518
Page 2
background image

The warning messages are single cycle, non-resettable and repetitive warning messages. The single cycle warning messages are:
-

CHANGE OIL SOON

-

OIL CHANGE REQUIRED

-

LOW WASHER FLUID LEVEL

-

LOW BRAKE FLUID LEVEL

The single cycle warning messages will display once whenever the key is turned to ON or a fault occurs in a system and can be cleared by pressing the
RESET button.

The repetitive warning messages are:
-

CHECK CHARGING SYSTEM

-

TRANSMISSION OVERHEATED

-

CHECK TRANSMISSION

-

LOW FUEL LEVEL

-

LOW OIL PRESSURE

-

CHECK ENGINE TEMPERATURE

-

CHECK TIRE PRESSURE

-

CHECK FUEL CAP

The repetitive warning messages are displayed at a fixed interval whenever the key is turned ON or is in the ACC position. To remove a repetitive
warning message, press the RESET button. The message will only reoccur after 10 minutes or until the warning condition is corrected.

The tire pressure warning is displayed whenever the tire pressure module receives a signal from a tire pressure sensor, indicating that the tire pressure
is out of range.

The non-resettable warning messages will display whenever the key is turned to ON and a fault occurs in a system. The fault must be corrected to clear
the non-resettable warning messages.

The non-resettable warning messages are:
-

DOOR AJAR

-

BACKUP AID

Driver/Vehicle Information Display|Testing and Inspection > < Information and Message Center|Page 8518