mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Doors, Hood and Trunk|Hood > < Body - Rear Door Window Stuck In Up Position/Inoperative|Page 8978
Page 4
background image

1. Remove the applique on the rear door.

-

Remove the screws.

2. Pull the glass out through the top inboard side of the door.

Item 10: Window Regulator Motor Removal Note.

1. Before removing the window regulator motor, secure the glass in the full up position with tape.

Item 12: Rear Door Window Glass Top Run Removal Note

1. Remove the glass top run through the top opening of rear door.

INSTALLATION

1. To install, reverse the removal procedure.

Doors, Hood and Trunk|Hood > < Body - Rear Door Window Stuck In Up Position/Inoperative|Page 8978