Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
5. To install, reverse the removal procedure.
6. Fill the engine with clean engine oil.
Item 6: Axle Housing Removal Note
1. CAUTION: Do not let the axle housing hang freely. Failure to follow this instruction can result in damage to the vehicle.
Using a transmission jack, lower the axle housing to gain clearance for the removal of the oil pan.
Item 17: Lower Block Cradle Removal Note
1. CAUTION: Failure to back off the set screws can result in damage to the lower block cradle.
Back the set screws off until they are below the lower block cradle boss.
Item 18: Lower Block Cradle Gasket Removal Note
1. NOTE: Gasket material as well as silicone sealant may be present in the cavities in the main bearing cap. This material must be removed
completely prior to assembly.
Clean the sealant from the cavities on the rear main bearing cap.
Item 18: Lower Block Cradle Gasket Installation Note
