mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine Controls/Emissions - Exhaust Sulfur Smell|Page 3312 > < Engine Controls/Emissions - Exhaust Sulfur Smell
Page 2
background image

Converter Only. 2002
Explorer Sport/Sport Trac
3-4-02 Through 3-27-02
With Automatic
Transmission, 11-02-01
Through 3-4-02 With
Manual Transmission

DEALER CODING

CONDITION

BASIC PART NO.

CODE

5F250

42

OASIS CODES: 403000, 499000

Disclaimer

Service Procedure

2002-2003 4 DOOR EXPLORER/MOUNTAINEER

4.0L

Vehicles Built 1/14/02 Through 12/02/2002

At latest level for engine calibration.

1.

Install Exhaust wrap on the pipes between the light-off and the underbody catalyst referring to the instruction sheet in the kit.

2.

Refer to Drive Sequence heading to purge stored sulfur from catalyst.

3.

See Contributing Factors heading for additional information.

NOTE

CONVERTER REPLACEMENT OR RECALIBRATION IS NOT NECESSARY.

Vehicles Built Before 1/14/02

1.

Verify that WDS is at the latest level, B21.0 or higher.

2.

Reprogram the PCM with the latest calibration.

3.

Install Exhaust wrap on the pipes between the light-off and the underbody catalyst referring to the instruction sheet in the kit.

4.

Refer to Drive Sequence heading to purge stored sulfur from catalyst.

5.

See Contributing Factors Heading for additional information.

NOTE

DO NOT REPLACE THE CONVERTER.

2002-2003 4 DOOR EXPLORER/MOUNTAINEER

4.6L

Vehicles Built Prior To 12/02/2002

1.

Install Exhaust wrap on the pipes between the light-off and the underbody catalyst referring to the instruction sheet in the kit.

2.

Refer to Drive Sequence heading to purge stored sulfur from catalyst.

3.

See Contributing Factors Heading for additional information.

Engine Controls/Emissions - Exhaust Sulfur Smell|Page 3312 > < Engine Controls/Emissions - Exhaust Sulfur Smell