Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
Control Assembly: Service and Repair
Auxiliary Climate Control
Auxiliary Climate Control Housing, Assembly
AUXILIARY CLIMATE CONTROL HOUSING, ASSEMBLY AND COMPONENTS
REMOVAL
NOTE:
-
Installation of a new accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the accumulator.
-
New O-ring seals, lubricated in clean PAG oil, must be installed before reconnecting any A/C fitting which has been disconnected.
-
Clean and lubricate the coolant hoses with plain water only if needed.
1. Position the vehicle on a hoist with the gear selector in NEUTRAL.
2. Recover the refrigerant.
3. Remove the LH quarter trim panel.
4. Detach the headliner duct from the auxiliary climate control housing.
Illustration 1 Of 2
5. Illustration 1 of 2. Remove the components in the order indicated in the illustration and table.
