Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
4. Remove the driver air bag module.
1
Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
2
Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
3
Disconnect the horn switch electrical connector.
4
Remove the driver air bag module.
5. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
6. Push in on the glove compartment sides, releasing the stops and lowering it out of the way.
7. Through the glove compartment opening, release the tab and disconnect the passenger air bag module electrical connector.
