Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
22. Attach the restraint system diagnostic tool to the front LH seat safety belt buckle pretensioner floor electrical connector.
23. Connect the battery ground cable.
24. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Prove Out
Procedure
25. Disconnect the battery ground cable and wait at least one minute.
Reactivation
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the
deactivation procedure.
All vehicles
1. NOTE: Make sure the battery negative cable is still disconnected before continuing with the reactivation portion of this procedure.
From under the front LH seat, remove the restraint system diagnostic tool from the safety belt buckle pretensioner floor electrical connector.
2. From under the front LH seat, connect the safety belt buckle pretensioner electrical connector.
Vehicles with safety canopies
